ASAHI Conquest Pro/Confianza ProProduct Code (REF): AGH143090
Confianza® Pro (marketed as Conquest Pro in North America) is Asahi Intecc's highest tip-load penetration wire for the most difficult chronic total occlusions — those with dense, organized fibrocalcific proximal caps that resist all lower tip-load approaches. The 9 gf standard grade and 12 gf Confianza Pro 12 variant deliver concentrated point force through a tapered 0.009/0.014 in tip that acts as a needle rather than a blunt probe, allowing direct penetration through calcified cap material when rotating-core wires such as the Gaia series cannot advance. The wire is used within a structured escalation algorithm: Confianza Pro is reached only after Fielder XT, XT-A, and the Gaia series have been attempted. Due to the very high tip force, correct technique is critical — the wire is rotated (not pushed) to avoid vessel perforation, and a supportive microcatheter (Corsair Pro or Caravel) must be present immediately behind to prevent buckling and to provide back-up. Tip load of 9 gf is sufficient for the majority of fibrocalcific cases; the 12 gf grade is reserved for the most calcified, undilatable caps. Confianza Pro is available in straight and J tip shapes, 180 cm and 300 cm lengths, with a 20 cm coil segment and hydrophilic coating (uncoated ball tip to prevent inadvertent advancement).
Available under product codes AGH143090, AGH143090J, AGH143390, AGH143390J, AGH143091, AGH143091J, AGH143391, AGH143391J.
Sizes & Specifications
- Diameter
- 0.009 – 0.014 in
- Usable length
- 180 cm / 300 cm
- Tip load
- 9 / 12 gf
- Coating
- Hydrophilic (Uncoated Ball Tip)
Manufacturer: Asahi Intecc Co., Ltd. · Reference source: medical.asahi-intecc.com
Design & Technology
Technical characteristics and diagrams as published by Asahi Intecc.
Structure
Product Identification & Specifications
Reference identifiers for procurement, registration and tender documentation.
| Product Code | AGH143090 |
|---|---|
| REF Numbers | AGH143090, AGH143090J, AGH143390, AGH143390J, AGH143091, AGH143091J, AGH143391, AGH143391J |
| Manufacturer | Asahi Intecc Co., Ltd. |
| Brand | Asahi Intecc |
| Product Family | Coronary Guidewires |
| Country Availability | Tajikistan, Afghanistan |
Clinical Applications
The ASAHI Conquest Pro/Confianza Pro is a cto coronary guidewire in the Coronary Guidewires family from Asahi Intecc Co., Ltd., used by interventional specialists in procedures where a cto coronary guidewire of this class is indicated. It is supplied in 8 configurations (catalog codes AGH143090 through AGH143391J) to match anatomical and procedural requirements.
For the complete indications for use, contraindications and instructions for use (IFU), request the official Asahi Intecc documentation through our clinical team. Modern Medical Solutions supplies the ASAHI Conquest Pro/Confianza Pro to hospitals and cath labs across Tajikistan and Afghanistan.
Ordering Information
Catalog reference codes as published by Asahi Intecc. Contact us to confirm current availability.
| Product Name | Catalog No. | Tip Shape | Usable Length | Outer Diameter | Coil Length | Radiopaque Length | Coating | Coating Length |
|---|---|---|---|---|---|---|---|---|
| ASAHI Conquest Pro/Confianza PRO | AGH143090 | Straight | 180cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro/Confianza PRO | AGH143090J | J | 180cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro/Confianza PRO | AGH143390 | Straight | 300cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro/Confianza PRO | AGH143390J | J | 300cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro 12/Confianza PRO 12 | AGH143091 | Straight | 180cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro 12/Confianza PRO 12 | AGH143091J | J | 180cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro 12/Confianza PRO 12 | AGH143391 | Straight | 300cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
| ASAHI Conquest Pro 12/Confianza PRO 12 | AGH143391J | J | 300cm | 0.23/0.36mm (0.009/0.014") | 20cm | 20cm | Hydrophilic(Uncoated Ball Tip) | 20cm |
Downloads & Documentation
Instructions for use (IFU), technical datasheets and clinical literature for the ASAHI Conquest Pro/Confianza Pro are available on request from our clinical team.
Request DocumentationFrequently Asked Questions
- What is Confianza® Pro and when is it used?
- Confianza® Pro (marketed as Conquest Pro in North America) is a very high tip-load penetration guidewire (9 gf standard, 12 gf in the Pro 12 variant) for the most fibrocalcific CTO caps. It is used after Fielder XT, XT-A, and the Gaia series have failed to penetrate the proximal cap — typically in dense, organized fibrocalcific occlusions where lower-tip-load rotating-core wires cannot advance. The tapered 0.009/0.014 in tip acts as a needle to pierce calcified tissue.
- What is the difference between Confianza Pro 9 gf and Confianza Pro 12 gf?
- The standard Confianza Pro delivers 9 gf of tip force (catalog AGH143090/AGH143390), sufficient for the majority of fibrocalcific caps that resist Gaia Third or Gaia Next 3. Confianza Pro 12 (catalog AGH143091/AGH143391) delivers 12 gf and is reserved for the hardest, most densely calcified caps where 9 gf is insufficient. At 12 gf, very controlled rotation technique is required to avoid vessel perforation.
- What catalog numbers are available for Confianza® Pro?
- Confianza Pro 9 gf: AGH143090 (Straight, 180 cm), AGH143090J (J, 180 cm), AGH143390 (Straight, 300 cm), AGH143390J (J, 300 cm). Confianza Pro 12 gf: AGH143091 (Straight, 180 cm), AGH143091J (J, 180 cm), AGH143391 (Straight, 300 cm), AGH143391J (J, 300 cm). All have a 0.23/0.36 mm tapered tip with an uncoated ball tip.
- Why does Confianza® Pro have an uncoated ball tip?
- The uncoated ball tip design prevents the wire from self-advancing inadvertently once it has penetrated the cap. At 9–12 gf tip load, a fully hydrophilic-coated tip would slide through the vessel wall too easily after initial cap penetration. The uncoated ball provides controlled resistance, giving the operator tactile feedback about where the tip is and preventing unintended deep advancement that could cause perforation.
- What technique is required when using Confianza® Pro?
- Confianza Pro should always be used with a supportive microcatheter (Corsair Pro, Caravel, or SASUKE) immediately behind it. The wire is rotated — not pushed — to drive the tapered tip through the cap. A supportive microcatheter prevents wire buckling, which is critical at high tip loads because a buckled wire can suddenly release stored energy and spring forward. After cap penetration, the microcatheter is advanced over the wire to confirm true-lumen position before exchanging for a softer wire.
